Product Information:
Circuitron #RS-1
The CIRCUITRON RS-1 is a two piece kit consisting of a subminiature reed switch measuring only 0.1” x 0.6” and a tiny bias magnet. When installing the RS-1 kit, the reed switch is wired into one of the supply leads of the electrical device to be controlled. The reed switch is then fastened to the inside of the locomotive or car shell (away from magnetic materials such as the motor) with ACC or epoxy cement. The bias magnet is then placed in position following the simple instructions packed with the RS-1 and glued in place. When the magnet is properly located, its magnetic flux will be strong enough to hold the reed switch closed once it has been closed by an External Magnet (not included), but not strong enough to close the reed switch on its own. This results in the latching On and Off action. The RS-1 can control up to 0.25 amps.
Circuitron ~ Hidden Accessory Switch ~ Kit ~ 9101
Circuitron
MSRP:
$7.95
$6.36
(You save
$1.59
)
- SKU:
- CIR9101
Last One
Last One
Last One
Low Stock
