DCCconcepts Cobalt SS Crossover ~ Cobalt SS Motors With Controller & Accessories ~ 12 Pieces ~ DCP-CBSS-12
Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 12 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 12 Pack – This pack contains 12x Cobalt-SS Above-Board Point Motors with “Plug & Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC, conventional switches or both.
The pack also contains the following accessory leads and accessories:
3x Cobalt-SS Extension Cable (600mm) to enable motors to be mounted further away from the Control Board.
3x Cobalt-SS Y-connection or reverse connection cable to enable two or more motors to be connected to one output on the Control Board.
6x Cobalt-SS Control Boards
Linkage pack – to connect your Cobalt-SS motor to your turnout.
Mounting screws – to install both the Cobalt-SS motors and the control boards.
Motor Size:
Width 27mm
Depth 14mm
Height 11mm
Control Board Size:
Width 115mm
Depth 60mm
Height 25mm
Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 12 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 12 Pack – This pack contains 12x Cobalt-SS Above-Board Point Motors with “Plug & Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC, conventional switches or both.
The pack also contains the following accessory leads and accessories:
3x Cobalt-SS Extension Cable (600mm) to enable motors to be mounted further away from the Control Board.
3x Cobalt-SS Y-connection or reverse connection cable to enable two or more motors to be connected to one output on the Control Board.
6x Cobalt-SS Control Boards
Linkage pack – to connect your Cobalt-SS motor to your turnout.
Mounting screws – to install both the Cobalt-SS motors and the control boards.
Motor Size:
Width 27mm
Depth 14mm
Height 11mm
Control Board Size:
Width 115mm
Depth 60mm
Height 25mm
