ESU ~ SignalPilot ~ Accessory Decoder ~ 16 Outputs ~ Multiple Lighting Effects ~ 51840

ESU 51840 SignalPilot ~ Accessory Decoder ~ 16 Outputs ~ Multiple Lighting Effects

The ESU SignalPilot decoder is a multi-protocol decoder designed primarily for switching daylight signals. It has 16 outputs to which micro lamps or LEDs (with series resistors) can be connected directly. Because all outputs are designed as push/pull output stages, both daylight signals with common anode as well as daylight signals with a common earth connection (common cathode) are suitable, as is the case with Viessmann® signals. Motorised semaphore signals and turnout drives can also be operated with the SignalPilot.

Operating modes

The SignalPilot supports both DCC with RailComPlus® and Motorola®.

Programming allows for each output to be assigned to any address or to a combination of addresses.

LokProgrammer
The easiest method of configuring the SignalPilot is programming it with the ESU LokProgrammer.

Simply choose the desired signal type, and the wiring will be displayed on the screen.

Designed with future developments in mind
The firmware of the SignalPilot can be updated with the aid of the LokProgrammer at any time.

This may be necessary whenever we add new signal types.