Compatible with JMRI for signal logic. Small package size. Just 1-¾" x 3-1/4" x 5/8". POC (Powered Over CAN) LCC® connections*. *Note: Requires a powered LCC bus. [20 ma. bus load] (plus any I/O load current such as LEDs) Uses Futaba J (polarized 3 wire) Servo extension cables between signal heads. Requires SSSB (Simple Serial Signal Bus) decoder/drivers at each signal head.
Signal LCC-32H features:
- 32 Head signal controller plus 8 line Input/Output node for NMRA CAN bus LCC®. (maximum of 96 lamps)
- Compatible with JMRI for signal logic.
- Small package size. Just 1-¾" x 3-1/4" x 5/8".
- POC (Powered Over CAN) LCC® connections. Note: Requires a powered LCC bus. [20 ma. bus load] (plus any I/O load current such as LEDs)
- Uses Futaba J (polarized 3 wire) Servo extension cables between signal heads.
- Requires SSSB (Simple Serial Signal Bus) decoder/drivers at each signal head.
12 Signal LCC-32H compatible Input/Output Cards
The RR-CirKits Signal LCC-32H and its compatible I/O modules are designed to be clipped into Tyco 3-1/4" Snap-Track® mounted to the bench work. (Snap-Track® is a plastic channel designed to mount PC cards to a chassis, not something to run trains on.)
A single Signal LCC-32H or compatible I/O module fits into the 3TK2-1 (single) mounting track. Other widths are available for compact installations using multiple boards. A common interlocking installation would use a double mounting track.
Each I/O module is equipped with connectors to facilitate these I/O board connections. Use IDC connectors and ribbon cables to connect the Signal LCC-32H to the I/O cards.
