WifiTrax ~ Eight-Way Power Distribution Board ~ WAP-80
The WAP-80 provides a convenient means of distributing 15V power from a mains adapter to your Wi-Fi Layout modules around your model railway. Connect a mains power adapter such as PA15-43-1 to the power jack on the side of the module, then wire up to 8 Wi-Fi Layout Modules to the screw connectors. This is ideal to provide power to modules such as WFS-46, WFP-40, WFG-80 and others. Be sure not to exceed the current rating of your mains adapter.
Specification:
The WAP-80 provides a convenient means of distributing 15V power from a mains adapter to your Wi-Fi Layout modules around your model railway. Connect a mains power adapter such as PA15-43-1 to the power jack on the side of the module, then wire up to 8 Wi-Fi Layout Modules to the screw connectors. You can connect moduloes such as WFS-46, WFP-40, WFG-80 and others. Be sure not to exceed the current rating of your mains adapter.
Input
1 Barrel Connector Power Jack. 2.5mm dia. pin, 5.5mm outer diameter, center positive.
Outputs
8 Pairs of Screw Connectors, Marked Positive and Negative, all connected to the Power Input Jack.
The WAP-80 provides a convenient means of distributing 15V power from a mains adapter to your Wi-Fi Layout modules around your model railway. Connect a mains power adapter such as PA15-43-1 to the power jack on the side of the module, then wire up to 8 Wi-Fi Layout Modules to the screw connectors. This is ideal to provide power to modules such as WFS-46, WFP-40, WFG-80 and others. Be sure not to exceed the current rating of your mains adapter.
Specification:
The WAP-80 provides a convenient means of distributing 15V power from a mains adapter to your Wi-Fi Layout modules around your model railway. Connect a mains power adapter such as PA15-43-1 to the power jack on the side of the module, then wire up to 8 Wi-Fi Layout Modules to the screw connectors. You can connect moduloes such as WFS-46, WFP-40, WFG-80 and others. Be sure not to exceed the current rating of your mains adapter.
Input
1 Barrel Connector Power Jack. 2.5mm dia. pin, 5.5mm outer diameter, center positive.
Outputs
8 Pairs of Screw Connectors, Marked Positive and Negative, all connected to the Power Input Jack.