YaMoRC ~ 16 Channel LocoNet Feedback Detection Module ~ Current Sensing ~ YD6016LN-CS



Out of stock

YaMoRC ~ Standard Current-Sensing Feedback Module with LocoNet Interface ~ YD6016LN-CS

Our standard current-sensing feedback module with LocoNet Interface

It presents:

  • 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common

  • 2 Amp continuous current per detector, 8 Amps in total combined over the 16 detectors on the whole module

  • 5 Amp short duration overload (100ms) capable per detector.

  • 1mA current sensitivity

  • Capacitive input filter on every input, to suppress noise on long cables and track-sections

  • Configurable on- and off-delay settings for each input for optimal de-bouncing in case of non-optimal wheel-track contact

  • Every input is individually configurable for various actions like feedback, turnout toggle, turnout throw, turnout close

  • Every input individually configurable for feedback- or turnout-address

  • ES-IN-Link for direct connection of up to 5 additional YD6016ES modules (effectively creating a 96-input LocoNet module)

  • ES-IN-Link connection to other ES-Link-enabled modules for module-configuration

  • ES-IN-Link connection to YD9101 for web-based configuration

  • USB connection with one Virtual COM port for the YD.Command protocol

  • Firmware updatable over USB

  • Power supply directly from LocoNet-T or -B ( or USB for easy configuration and updating on a PC )