WifiTrax Workshop Adapter Module ~ 5 Pin JST ~ FWA-11
The FWA-11 provides capability to use our WifiTrax Workshop Windows software to update the firmware in your WifiTrax module. The module contains a USB/Serial adapter chip mounted on a PCB and with a cable to a 5-pin male JST connector. The JST connector connects to the corresponding female connector on your WifiTrax module to communicate with the serial interface of the on-board microprocessor. Attaching the module forces the microprocessor into boot mode which allows loading of firmware updates from WifiTrax using our WifiTrax Workshop software. You can also use the module to perform other serial operations with the module as may be later defined.
FWA-11 USB Workshop Adapter Moduled
Input
USB Mini-B (5-pin) Connector. Connects via a USB cable to your Windows computer.
Outputs
5-pin JST connector. Only four pins are used - GND, TXD, RXD, /PGM
Ground.
TXD - Serial data transmitted FROM WifiTrax Module being updated (e.g. WFD-30, WDMI-27 etc.
RXD - Serial data received TO WifiTrax Module being updated.
/PGM - Pulled low by the WFA-10 to place WifiTrax Module in boot mode.
Quick Start Guide: Click Here
The FWA-11 provides capability to use our WifiTrax Workshop Windows software to update the firmware in your WifiTrax module. The module contains a USB/Serial adapter chip mounted on a PCB and with a cable to a 5-pin male JST connector. The JST connector connects to the corresponding female connector on your WifiTrax module to communicate with the serial interface of the on-board microprocessor. Attaching the module forces the microprocessor into boot mode which allows loading of firmware updates from WifiTrax using our WifiTrax Workshop software. You can also use the module to perform other serial operations with the module as may be later defined.
FWA-11 USB Workshop Adapter Moduled
Input
USB Mini-B (5-pin) Connector. Connects via a USB cable to your Windows computer.
Outputs
5-pin JST connector. Only four pins are used - GND, TXD, RXD, /PGM
Ground.
TXD - Serial data transmitted FROM WifiTrax Module being updated (e.g. WFD-30, WDMI-27 etc.
RXD - Serial data received TO WifiTrax Module being updated.
/PGM - Pulled low by the WFA-10 to place WifiTrax Module in boot mode.
Quick Start Guide: Click Here
