Digikeijs DR4018 16-Channel Switch Decoder ~ Works With All DCC Brands!

Works with all DCC Brands!

Digikeijs DR4018 DigiSwitch

Works With The Following Turnouts:

Kato - All Turnouts & Scales – Requires DR4101

Atlas - All Turnouts & Scales

Bachmann - All Turnouts & Scales

American Flyer - S Gauge

Lionel - S & O Gauge

MTH - S & O Gauge

Tortoise Switch Machines - Requires DR4101

Cobalt Switch Machines - Requires DR4101

Peco

And Others

The DIGISWITCH switching decoder is a fully programmable, multi-protocol switching decoder that can digitally switch anything imaginable on your model railway. The switching decoder has 16 switchable outlets which can, for example, switch 16 lights or 8 turnouts. The switching decoder has several presets that enable you to switch four Dutch three-light signals with number boards.

Configured as standard to operate 8 switches and equipped with various presets allowing, for example, for 16 permanent on/off switches, 8 two-light signals or 4 three-light signals. A combination of presets is also possible.

Features:

• 8 switch control for motor drives - Use the DR4101 Switch Motor Interface for Tortoise and Cobalt switch machines.


• 16 outputs with or without fluorescent light effect


• 8 Ahobs4 AKIs 4 Dutch signals Presets for Dutch, Belgian and German signal aspects.


• Multiprotocol DCC / Motorola Programmable via POM


• Maximum load of 2.5 Amps


• All outputs on one side of the module


• Works with JMRI, RocRail, Etc...