TCS M4-KAC DCC Wired Decoder With Keep Alive Plug 1429
The M4 is a small form factor hard-wire decoder with 2 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited.
The M4-KAC includes a factory-installed 2-Pin Mini Connector with Blue and Black&White wires to use when connecting Keep Alive® devices with the same 2-Pin Mini Connector. Keep Alive® devices with the connector are designated as "KA(n)-C"
Also see the KAM4, which is a M-series decoder with on-board Keep Alive®. The M4-KAC can be used in situations where the Keep Alive® device must be mounted elsewhere, and needs to be disconnected occasionally.
Provides superior slow speed control and high performance under load.
Super-quiet motor control for "buzz" free motor performance.
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
Allows you to make custom acceleration and deceleration curves.
This decoder can be used with 12 Volt bulbs.
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Choose from 20 separate user-programmable lighting effects!
Configure multiple different brightness levels for your LED's or incandescent bulbs.
Feature which prevents accidental/unwanted programming while activated.
Fully compatible with Airwire™ operation.
Configure custom speed curves and set speed limits.
Interface Type: Hard-Wire
Dimensions (L x W x H): 0.587" x 0.365" x 0.135" or 14.91mm x 9.27mm x 3.43mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 100 mA
12V Outputs: 4
The M4 is a small form factor hard-wire decoder with 2 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited.
The M4-KAC includes a factory-installed 2-Pin Mini Connector with Blue and Black&White wires to use when connecting Keep Alive® devices with the same 2-Pin Mini Connector. Keep Alive® devices with the connector are designated as "KA(n)-C"
Also see the KAM4, which is a M-series decoder with on-board Keep Alive®. The M4-KAC can be used in situations where the Keep Alive® device must be mounted elsewhere, and needs to be disconnected occasionally.
- Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
- Quiet Drive:
Super-quiet motor control for "buzz" free motor performance.
- DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
- Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
- Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
- Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
- Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
- Dimmable Brightness:
Configure multiple different brightness levels for your LED's or incandescent bulbs.
- Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
- Airwire™ Compatible:
Fully compatible with Airwire™ operation.
- User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Interface Type: Hard-Wire
Dimensions (L x W x H): 0.587" x 0.365" x 0.135" or 14.91mm x 9.27mm x 3.43mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 100 mA
12V Outputs: 4