TCS ~ T1-KAC ~ DCC Motor Decoder ~ 9 Pin JST ~ 2 Function ~ Keep Alive 2 Pin Plug ~ 1423

TCS

Was: $47.95
Now: $38.36
SKU:
TCS-1423

Out of stock

TCS T1-KAC DCC Decoder 9 Pin With Keep Alive Plug 1423



The T1 is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug.

The T1-KAC is equipped with a 2-pin mini connector (Blue and Black w/ White Stripe wires) for use with a TCS Keep Alive™ with connector ("KA-C"). In order to use Keep Alive™ with this decoder, simply connect the plug from the Keep Alive™ to the plug on the decoder.

Note: The Green and Purple wires on this decoder are not used. The T1 is a 2-function decoder, but still uses the 9-pin JST which includes the Green and Purple wires.

Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.

Quiet Drive:
Super-quiet motor control for "buzz" free motor performance.

DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

Variable Momentum:
Allows you to make custom acceleration and deceleration curves.

Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.

Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.

Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!

Dimmable Brightness:
Configure multiple different brightness levels for your LED's or incandescent bulbs.

Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.

Airwire™ Compatible:
Fully compatible with Airwire™ operation.

User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.


Interface Type: Direct-Plug (9-Pin JST)
Dimensions (L x W x H): 0.969" x 0.661" x 0.193" or 24.61mm x 16.79mm x 4.9mm
Scale: HO Scale
Continuous/Peak: 1.3/2.0 Amp
Total Functions: 2
Function Rating: 100 mA
12V Outputs: 2