Our YouTube Channel

Iron Planet Hobbies on YouTube

Our YouTube Channel

Free DCC how-to videos, filmed on our own workbench and layout. Set up command stations, boosters, turnout and servo decoders, block detection, RailCom and WiFi throttles step by step, for Digitrax, NCE, ESU, Roco Z21, Lenz and more.

68 videos394K views2.3K subscribers5+ hours of how-to

Start hereHow To Get Started With DCC For Model Trains5K views

Most Watched

What other modelers watch most

Step-by-Step Series

Watch them in order, start to finish

DR5000 From the Box

Setup, JMRI, programming track and the booster tab.

4 parts · 24 min

DR4024 Setup, Parts 1–4

Factory reset to a working grade crossing with gates.

4 parts · 15 min

DR5033 Booster Setup, Parts 1–3

Wiring, module ID, then CV values and options.

3 parts · 16 min

Easy NCE RailCom Setup, Parts 1–3

Add RailCom detection to an NCE layout.

3 parts · 11 min

TCS UWT-100 on Any System

The same WiFi throttle on DR5000, NCE, ECoS and CabControl.

4 parts · 9 min

CVP Easy DCC Throttles on LocoNet

Running Digitrax with CVP OPS throttles.

5 parts · 4 min

Browse All Videos

68 videos in 7 topics
Topic
Works with

4 videos

Start Here

New to DCC, or wondering what's under our layout? Start with these. They cover what a DCC system does, the hardware that runs the Iron Planet layout, and a full command station walk-through.

Learn the wiring:How DCC power works →Track bus & feeders →

8 videos

Command Stations & Software

Command station setup, step by step with no step skipped: first power-up, programming track, consisting, booster settings, and connecting to JMRI, RocRail and Lenz software.

Learn the wiring:Programming track →XpressNet & multi-bus systems →

18 videos

Turnouts, Servos & Lighting

Control turnouts from your throttle or computer. We set up accessory and servo decoders with Atlas, Bachmann E-Z Track, Kato Unitrack, Peco and S gauge turnouts, plus grade crossings, layout lighting, staging power and sensor inputs.

Learn the wiring:Turnout control & stationary decoders →DCC-friendly turnouts →

11 videos

Boosters & Reverse Loops

When one command station isn't enough: adding boosters to ECoS, CabControl, NCE, Roco Z21 and Digitrax systems, setting booster CVs, a 20-sound-loco booster challenge, and a short-free reverse loop module.

Learn the wiring:Boosters: common ground vs opto →Auto reversers →Reverse loops →

7 videos

Block Detection & RailCom

Occupancy detection and RailCom: see which block a train is in and read its address back from the track. The starting point for signals, CTC panels and JMRI automation.

Learn the wiring:Block detection →Signaling →

15 videos

WiFi & Wireless Throttles

Cut the cord. Set up TCS UWT-100, ESU Mobile Control, Roco WLANmaus, ProtoThrottle and phone throttles, most of them without a PC or JMRI, plus CVP Easy DCC throttles on LocoNet.

Learn the wiring:LocoNet →NCE Cab Bus →

5 videos

Layout Tours & Train Runs

Take a break from wiring. A tour of the Iron Planet layout, long coal drags with pushers, and a real BNSF local in Springfield, Missouri.

About the Digikeijs videos

Own a Digikeijs DR5000, DR4018 or DR5033?

Digikeijs closed in 2023, but the steps in these videos haven't changed, and we still stock some Digikeijs modules. Building something new? We carry YaMoRC, the new line from Karst Drenth, who developed the Digikeijs DR modules with them. The YD9401 even drops into a DR5000 to replace its WiFi/LAN module.

More Free How-To's

Want a Video on Something?

Tell us what you'd like to see set up or explained and we'll add it to our list. Call 833-322-4373 or send us a message.

FAQ

Are these videos free?

Yes. Every video plays right on this page or on our YouTube channel. Subscribe on YouTube to see new uploads first.

Do the Digikeijs videos still help now that Digikeijs has closed?

Yes. Digikeijs closed in 2023, but thousands of DR5000, DR4018, DR4024 and DR5033 units are still running on layouts, and the setup steps haven't changed. We still stock some Digikeijs modules. For new layouts we carry YaMoRC, the new line from Karst Drenth, who developed the Digikeijs DR modules with them.

Will these work with my DCC system?

Most of our accessory videos work with any brand. Use the "Works with" buttons to see the videos for Digitrax, NCE, ESU, Roco Z21, Lenz, TCS or JMRI.

Can I request a video?

Please do. Tell us what you'd like to see set up or explained and we'll add it to our list.

Videos by Iron Planet Hobbies, playing from our YouTube channel. View counts are rounded by YouTube. Product names belong to their manufacturers. Always follow the instructions that come with your equipment. Videos, prices and stock checked October 30, 2026.